EPOXY

Transpoxy Primer 1.16

A two pack polyamide cured epoxy primer with non-toxic pigments for the protection of steel structures against corrosion in industrial and marine environments. The primer can be used as a tiecoat on inorganic zinc silicates. Overcoating with a wide range of Transocean products.

          Pack A :           Pack B : 

Transpoxy ZP Primer 1.61

A two pack polyamide cured epoxy coating pigmented with zincphosphate and auxiliary anti-corrosive pigments for the protection of steel structures against corrosion. The products can be used as a primer or intermediate coat in Transpoxy systems.

           

Transpoxy M.I.O Primer 1.65

A two-pack polyamide cured epoxy coating pigmented with micaceous iron oxide. The product offers good resistance against abrasion and impact. The cured coating provides an excellent barrier against penetration of water and watervapour. The product can be used as a primer or intermediate coat in Transpoxy systems. The product offers resistance against dry heat up to 200°C.

          Pack A :           Pack B :    

Transpoxy HS Primer 1.81

A high solids epoxy coating pigmented with zincphosphate. Transpoxy HS Primer offers excellent durability and corrosion resistance. The product complies with the UK-Highway Agency coating specifications for bridges. It can be recoated with various Transpoxy or Transurethane systems.

Transpoxy Sealer 1.99

A two-pack polyamide cured epoxy coating suitable for atmospheric and immersion conditions. The product is used as an intermediate coat in Transpoxy systems and as a sealer/tiecoat on inorganic zinc silicates.

          Pack A :           Pack B : 

Transozinc Epoxy Primer ST 1.50

A two pack epoxy primer pigmented with zinc dust for an excellent protection of steel structures against corrosion in industrial and marine environments. The primer is especially recommended when (ultra) high-pressure hydroblasting is utilized as surface preparation. The product also tolerates Sa2- and St3 prepared substrates.

          Pack A :           Pack B : 

Transoplate Epoxy Primer 1.57

A two pack epoxy shopprimer pigmented with non-toxic pigments for the protection of steel structures against corrosion during construction The primer is quick drying and can be used as a holding primer. The product has the Lloyds certificate for shopprimers.

          Pack A :           Pack B : 

Transozinc Epoxy Primer SP 1.59

A single pack epoxy shopprimer pigmented with a high zinc content for the protection of steel structures against corrosion during construction. The primer is quick drying and has the Lloyds certificate for shopprimers. The product can be used for maintenance of zinc silicate coated substrates.

          

Tranpoxy Zinc Rich Primer 1.79

A zinc rich, epoxy primer formulated to give quick drying in order to be used with automatic spray equipment. It provides excellent anticorrosive properties on metal surfaces under marine and industrials environtment . This product can be overcoated with various Transpoxy Finish 4.60 or Transurethane Finish products.

          Pack A :           Pack B : 


Transpoxy Tar AA 2.12

A polyamine cured coal tar epoxy coating designed for use on areas where maximum water resistance , abrasion and chemical resistance is required. Recommended for underwater areas of marine-, offshore- and stationary structures of both steel and concrete. It has the Lloyds approval for corrosion control.

          Part A :            Part B : 

Transpoxy Barrier 2.18

A high solids epoxy barrier coating with excellent anticorrosive properties and good impact- and abrasion resistance. Good adhesion to St3 prepared steel substrates and compatible with most aged coatings. It can be recoated with various Transocean finishing systems.

          Part A :           Part B : 

Transpoxy Intermediate 2.19

A polyamide cured epoxy coating suitable for atmospheric and immersion conditions. The product is especially suitable as an intermediate coat between organic- and inorganic zinc-rich primers and the final topcoat. Can be recoated with all Transocean Finishing series.

          Part A :           Part B : 

Transvinypox HS 2.06

A two-pack, modified epoxy designed as a tiecoat or sealer on epoxy anticorrosive systems in order to improve the adhesion of subsequent antifouling systems. It can also be recoated with other Transocean finishing systems making it therefore a perfect second coat in a keel-to-rail anticorrosive system.

          Part A :           Part B : 

Transpoxy Glascote 4.40

A high solids glassflake epoxy coating with outstanding chemical and abrasion resistance. Especially suitable for areas facing severe corrosive conditions such as in splash zone areas.

          Part A :          Part B : 

Transpoxy Finish 4.60

A epoxy topcoat for interior and exterior use. Good resistance against weathering and the spillage of solvents, lubricants and chemicals. Transpoxy Finish cures to a tough and flexible coating and provides excellent adhesion to Transpoxy priming systems.

          Part A :           Part B : 

Transpoxy TankGuard 4.61

A polyamine cured phenolic epoxy coating with excellent resistance against most acids, alkalis and various solvents. The product has good flow properties resulting in a smooth, easy to clean surface and therefore reduces the possibility of cargo adsorption.

          Part A :           Part B : 

Transpoxy Deep Tanks 4.62

A polyamine cured epoxy coating with excellent resistance against organic and inorganic acids, alkalis and various solvents. The product complies with FDA §175.300 for the carriage of dry foodstuffs.

          Part A :           Part B : 

Transpoxy Masterbond 4.66

A high solids epoxy primer/coating pigmented with aluminium flakes to enhance water resistance properties. Excellent corrosion- and impact resistance and good weathering characteristics. Good adhesion to St3 prepared steel substrates and compatible with most aged coatings. Complies with bridge coatings specifications of the UK-Highway Agency.

          Part A :           Part B :           

Transpoxy Masterbond 4.67

A high solids epoxy primer/coating formulated with Masterbond binder technology. Transpoxy Masterbond has excellent anticorrosive properties and good impact- and abrasion resistance. Good adhesion to St3 prepared steel substrates and compatible with most aged coatings.

          Part A :           Part B : 

Transpoxy Hydro Finish 4.70

A polyamide cured epoxy coating with excellent resistance against fresh water and seawater. The coating has very good flexibility and cured quickly. Together with Transpoxy Hydro Primer 1.70 it forms a system that may be used for water tanks.

         Pack A :           Pack B : 

Transpoxy TankGuard 4.71

A solventfree, polyamine cured epoxy coating with excellent resistance against alkalis, diluted inorganic acids and various solvents. The product is especially suitable for carriage of wine and other low-alcoholic spirits (alcohol content <20%).

          Part A :           Part B :