FLOOR COATINGS

PRIMER

Kosflor S/B 360

A two-component solvent based epoxy sealer consisting of modified epoxy resin (Part A) and polyamide hardener (Part B). It also has an excellent adhesion to cementitious surfaces.

          Part A :           Part B :            

Kosflor S/B 466

A two-component high solids solvent based epoxy primer consisting of modified epoxy resin ( component A ) and polyamide hardener (component B ). It has an excellent adhesion to cementitious surfaces and offer good flexibility and impact resistance, this product can also adhered to slidely wet and damped surfaces.

          Part A :           Part B : 

Kosflor SF Primer

A two-component solvent free epoxy primer consisting of modified low viscosity epoxy resin ( component A ) and polyamide hardener (component B ). Low Viscous material with very good impregnating characteristics. Excellent adhesion. Suitable primer coat for all kinds of solvent free epoxy system.

         Part A :           Part B : 

TOP COAT

Kosflor FC-260

A waterbased, two-part epoxy coating consisting of polyamide with pigments ( Part A ) and modified epoxy resin ( Part B ). Generous to the environment due to the absence of solvents. Tools can be cleaned with water. Good chemicals resistance. Can be applied on wet concrete surfaces, as long as no ponding. Available in different colours.

         Part A :           Part B : 

Kosflor FC-460

KOSFLOR FC-460 is a two-part solvent based epoxy floor coating consisting of modified epoxy resin ( Part A ) mixed with inert pigments and polyamide hardener ( Part B ).

         Part A :           Part B : 

Kosflor Two Pack Aliphatic Polyurethane FC-350

A two-component solvent based aliphatic type polyurethane finishes consisting of special blended polyol resin with pigments ( Part A ) and Aliphatic polyisocyanate hardener ( Part B ). It is available in wide range of colours. KOSFLOR FC-350 restains its colour and high gloss under strong ultraviolet condition. It also provides both durable and decorative finish and with stand abrasion and chemical abuse.

          Part A :           Part B : 

Kosflor SL 200

A three-component self-leveling floor topping consisting of modified epoxy resin mixed with pigments ( Part A ), polyamide hardener ( Part B ) and graded aggregate ( Part C ).It provides a 2 mm thick hard wearing attractive leveled floor which is chemical resistant, impervious and extremely easy to clean.

          Part A :           Part B :